*** Notice: For the protection of property rights, this catalog is available for online browsing only. Please drop us a line if you would like to receive a copiable version of this catalog. Thank You!
"DOT Cargo Securement" discusses the goals of the DOT's Cargo Securement Standard, the requirements that the Standard places on motor carriers and drivers, and what drivers should do to ensure that the cargo on the truck they are driving stays put when they're on the road.
"DOT Commercial Motor Vehicle Inspections" discusses Federal inspection and maintenance requirements, how they apply to drivers, and how drivers can help to prevent accidents and injuries by complying with them.
"Drug and Alcohol Testing for CDL Drivers" course discusses this requirement and how it affects transportation employees...and reviews the testing process itself, what happens if a driver tests positive for a substance and how to get help for a drug or alcohol problem.
"DOT Hours of Service" discusses the Department of Transportation's "Hours of Service" regulations, what the regulations themselves require, and what drivers need to do to comply with them.
"DOT 'Reasonable Suspicion' Testing Overview: for Managers and Supervisors" course discusses the concept of "reasonable suspicion", the types of situations that justify reasonable suspicion testing, and the procedures that managers and supervisors should use to administer it fairly and effectively.
"Driving Defensively for CDL/Large Vehicle Drivers: Handling Adverse Conditions" discusses how drivers can prepare for and drive defensively when encountering bad weather, work zones, distracted and aggressive drivers and more.
"Driving Defensively for CDL/Large Vehicle Drivers: The Basics" discusses how truckers can not only prepare and defend themselves from other drivers, but from driving hazards such as low visibility, work zones and pedestrians as well.
"Electrocution Hazards Part I: Worksite Safety" training products discuss the electrical hazards that can be found on a job site, the OSHA standards that have been established to protect workers from them, and what employees should do to avoid accidents and injuries involving electricity.
"Electrocution Hazards Part II: Employer Responsibilities" training products discuss the electrical hazards that can be encountered on construction sites, the OSHA regulations that address them, and the responsibilities that employers have to protect workers from accidents and injuries involving electricity.
Topics covered in these products include:
Electricity, OSHA and employee safety.
Working near power lines.
Safe practices for using electrical tools and cords.
The physical stresses and strains that industrial jobs can cause in the workers who perform them can lead to severe, even disabling, injuries over time. These "ergonomic" injuries, including carpal tunnel syndrome, tendinitis and lower back pain, often result in missed work time, reduced productivity and increased expenses.
"Industrial Ergonomics" provide employees with the information they need to understand ergonomic hazards, recognize them in their workplace and know how to avoid them.
"Industrial Fire Prevention" training products look at the fire hazards that can be encountered in industrial environments, discuss how fires can be prevented, and explain what employees should do in case a fire emergency occurs in their workplace.
"Food Handling Safety" course discusses the contamination hazards that are associated with food handling, and the materials, equipment and safe work practices employees should use to ensure that the foods they prepare won't make someone else sick.
"HACCP...Hazard Analysis and Critical Control Points in the Food Industry" course discusses the most widely used, international food safety program...the "Hazard Analysis and Critical Control Points" system, which ensures that the food reaching consumers is safe enough to eat.
Topics covered in the course includes:
History, background and prerequisites
Developing a HACCP Plan
Hazards, critical control points (CCP's) and limits
Monitoring, corrective actions, verification and recordkeeping
"Hazard Communication in Auto Service Environments" courses discuss the requirements of the HAZCOM Standard, the hazards that can be associated with different types of HAZMATs, and what employees can do to avoid these hazards.
"Hazard Communication in Cleaning and Maintenance Environments" courses discuss the requirements of the HAZCOM Standard, the hazards that can be associated with different types of HAZMATs, and what employees can do to avoid these hazards.
"Hazard Communication in Healthcare Environments" courses discuss the requirements of the HAZCOM Standard, the hazards that can be associated with different types of HAZMATs, and what employees can do to avoid these hazards.
"Hazard Communication in Hospitality Environments" courses discuss the requirements of the HAZCOM Standard, the hazards that can be associated with different types of HAZMATs, and what employees can do to avoid these hazards.
"Hazard Communication in Industrial Environments" courses discuss the requirements of the HAZCOM Standard, the hazards that can be associated with different types of HAZMATs, and what employees can do to avoid these hazards.
"Introduction to Industrial Hygiene", discusses how Industrial Hygienist's look at the work environment, identify problems that could affect workers' safety and health, and find ways to eliminate or alleviate those problems.
Topics covered in the course include:
Worksite Analysis
Air Contaminants
Chemical and Biological Hazards
Physical Hazards... Noise and Vibrations
Physical Hazards... Light, Temperature, Heat and Radiation
Loading Dock Safety" training products review the different types of hazards that employees can encounter while working on loading docks, as well as discuss the equipment and safe work practices that they should use to avoid them.
"Manual Pallet Jack Safety" products discuss the hazards that can be associated with pallet jacks and the safe work practices and "rules of the road" that employees should follow to avoid them.
Topics covered in the products include:
How pallet jacks work.
Potential hazards.
Using a pallet jack safely.
Moving a load with a pallet jack.
Safe operation on loading docks, inclines and lift gates.
"Motorized Pallet Truck Safety" training products discuss the hazards that can be associated with walkies and walkie riders, and explain the procedures and equipment that employees can use to avoid them.
"Office Ergonomics" address how to recognize potential ergonomic problems, the potential for injuries if offices are not set up ergonomically, and practical solutions employees themselves can use to do that.
"Patient Handling Safety" training courses discuss the hazards that can be associated with patient handling tasks, and what healthcare workers can do to prevent accidents and injuries from occurring while they perform them.
Topics covered in these products include:
Patient handling and caregiver injuries.
Algorithms, patient assessment and body mechanics.
"Supported Scaffolding Safety in Industrial and Construction Environments" courses discuss supported scaffolds, how they should be constructed, the hazards that are associated with them, the OSHA regulations that address these hazards and the equipment and procedures that employees should use to work with them safely.
"Unconscious Bias" discusses how to figure out what your unconscious biases are, the effect they can have on your business, and what you can do to overcome them.
"Work Zone Safety" training products discuss the hazards that are associated with performing roadway construction and maintenance, and the equipment and safe work practices that employees can use to avoid them.
"Workplace Security" course discusses the importance of "workplace security", how to identify vulnerabilities in your facility, and the types of policies that need to be included in your Workplace Security Program.
Topics covered in the course include:
Identifying security issues and vulnerabilities
Strengthening physical security: Doors, glass and locks
Strengthening physical security: Lighting, surveillance and alarms